Friday, June 19, 2015
Monday, July 4, 2011
All TurnKey UTV products are made in the U.S.A. using only the highest grade materials available. The new Commander Cargo Basket is computer designed and CNC built for precision and accuracy. Basket was designed with a low profile design to maintain a low center of gravity and allow for clearance of obstructions while on the trail by keeping the basket below the roll cage. The unique panel design allows for multiple cargo mounting locations using the incorporated tie down points. The basket is large enough to carry camping gear, cooler, spare tire and much more. The unique design allows for the basket to be removed in minutes when not being used. The cargo basket comes standard in a heavy duty textured black powder coat that matches the Commanders roll cage. The cargo basket comes with everything required for installation including step by step instructions. The Cargo basket can be installed or removed in minutes using standard house hold tools. Installation does not require any cutting, drilling or welding. Suggested Retail is $424.95.
Contact TurnKey UTV for more info and tell them you saw this product on XTV Adventures Blog !!!
Tuesday, May 24, 2011
Saturday, April 2, 2011
Please change your favorites settings to reflect out new URL: www.xtvadventures.blogspot.com.
Monday, March 21, 2011
How To Make A Divider for the Lower Bed BoxHow To Make A Divider for the Lower Bed Box - Can-Am Commander Forum
I had a little time today to build a divider for the lower bed box. To save the next guy a little time on the dimensions, I thought I would go ahead and write this up real quick.
I made mine using 1/2" plywood that I had laying around. I suppose any 1/2" material will work just fine for this.
You will need to start with a piece that is 27.5" x 9.25". Measure down 3" from the top on each side and in 1/2" from the sides on the bottom. Draw a line connecting the 2 tick marks and cut away the material, forming a slight angle at the bottom. (The brown lines represent the original piece of material that will be removed). Round off the bottom corners using a coffee cup as a template.
I painted my divider black after I took these pictures. Hope this saves you a little time.
Wednesday, March 16, 2011
After reading the article please post your comment on the subject.
Should there be an ATV helmet requirement?
Wednesday, February 23, 2011
TurnKey UTV Can Am Commander Rear Upper Brush Guard. All TurnKey UTV products are made in the USA using only the highest grade materials available. Add extreme protection and aggressive styling to your Can Am Commander with our new rear upper brush guard. Guard is computer designed and CNC cut using heavy gauge steel brackets and American made steel tube. Brush guard attaches and pivots with the upper tailgate on your Commander. Our unique design adds protection to your vehicle at all angles including the top of the tailgate and taillights. Guard comes in two standard colors Commander yellow or heavy duty textured black powder coat that matches the Commanders roll cage. Brush guard can be installed in under 10 minutes using standard house hold tools and comes complete with everything needed for installation including instructions.
TurnKey UTV specializes in various fields of the UTV industry from innovative parts and accessories to complete builds and conversions.
TurnKey UTV is located in Carson City, NV